1.PCB分板机，一般主要应用于PCBA加工厂，它的目的是为了取代传统人工折板，提高生产效率和保证产品质量。

2.pcb电路板咋一看之下，是比较的复杂的。会有一种让人眼花缭乱的感觉的。但是，在实际的应用中间，不管是什么样的电路板，其应用原理，却并不是我们想象中的那样复杂的。pcb中电路板在实际的应用中间，主要分为单面pcb电路板，双面pcb电路板，以及多层pcb电路板这三种。单就面数来看，单面pcb电路板的机构是比较简单的。

3.当然除了分板机生产厂家在设计构造时对于安全问题的考虑，在实际操作过程中，工作人员在打开分板机电源之前，首先应该仔细检查上下切刀之间的间距，在分板机使用过程中，严禁将手伸进机器内部，在机器作业的任何情况中，都不可将刀片周围的防护板拆卸掉，以免造成意外事件发生。另外，PCB分板机只作为分板使用，不得用于其它用途，在使用的整个过程中，必须要做好静电防护工作，工作人员须佩戴静电环方能进行作业。

4.在使用分板机时，工作人员必须将PCB板分割槽放在放在固定刀座，并将PCB分板机置于水平位置移动，在操作机器的时候不要穿着过于宽松的衣服，长头发必须扎起来，以免意外事件发生。

5.在分板机停止作业时间段，工作人员应注意好维护保养工作，随时关注对上、下刀定位板以及上下刀刀刃的保护工作，清除机器表层及内部残屑，随时检查机器螺丝的紧固情况。如果机器长时间不工作的话，还应该卸去上下定位板以及上下切刀涂机油加以保护，在使用之前擦掉即可。另外，在机器使用之前还应该检查线路有无破损等情况。

6.另外，平时一定要做好日常的检修和维护，要看刀片是否松动避免在操作过程中出现意外事故、如果PCB分板机出现异常需要检修，那么首先确保电源线与插座脱离的情况下面，进行操作，以免发生触电的危险。

1. PCB splitter, generally used in PCBA processing plant, its purpose is to replace the traditional manual folding plate, improve production efficiency and ensure product quality.

The 2.pcb circuit board is very complicated. There will be a dazzling feeling. However, in the actual application, no matter what kind of circuit board, its application principle is not as complex as we imagined. In the practical application of PCB, there are three kinds of PCB: single-sided PCB, double-sided PCB and multi-layer PCB. In terms of the number of faces, the mechanism of the single sided PCB circuit board is the simplest.

3. Of course, in addition to the safety considerations in the design and construction of the distributor manufacturer, in the actual operation process, before opening the power supply of the distributor, the staff should first carefully check the distance between the upper and lower cutters. In the process of using the distributor, it is strictly forbidden to extend their hands into the inside of the machine, in any case of machine operation. In case, the protective panels around the blade should not be removed to avoid accidents. In addition, PCB sub-boards are only used as sub-boards, and can not be used for other purposes. During the whole process of use, static electricity protection must be done well, and staff members must wear static ring to work.

4. When using the splitter, the staff must put the splitter slot of PCB board on the fixed knife base and move the splitter horizontally. When operating the machine, they should not wear loose clothes. Long hair must be tied up to avoid accidents.

5. During the period when the splitter stops working, the staff should pay attention to the maintenance work, pay close attention to the protection of the upper and lower knife positioning plates and upper and lower knife blades at any time, remove the surface and internal debris of the machine, and inspect the fastening condition of the machine screw at any time. If the machine does not work for a long time, it should also remove the upper and lower positioning plates and the upper and lower cutting knives and coat the oil to protect it, and wipe it off before use. In addition, before the machine is used, it should check whether the line is damaged or not.

6. In addition, we must do a good job of daily maintenance and repair, depending on whether the blade is loose to avoid accidents in the operation process. If the PCB splitter is abnormal and needs to be repaired, first of all, ensure that the power cord and socket are separated from each other, so as to avoid the risk of electric shock.